3 Tap tower for 2 tap setup?

jtmwhyte · Post by **jtmwhyte** » Sat Mar 26, 2016 9:44 am

Looking to go with 2 taps in the house as opposed to the full fridge I have now (this will become my ferm chamber in the shed). I have a Danby Mini Fridge that I've been using as a fermentation chamber to this point and already have a 3 tap tower from an old project that I didn't finish. Any reason why I couldn't just use the top two holes in the tower and not the third hole? Any ideas on how to plug that 3rd Hole without making it look like shit?

Swine · Post by **Swine** » Sat Mar 26, 2016 10:41 am

You could block the tube off inside and leave the outside untouched.
If you want to tidy up the outside you could made or buy a nice beer logo on a flat piece of wood or metal and attach a wood dowel that snugly fits into the port on the tower and the. You have a nice logo between the taps.
Likely also be able to find a hydraulic fitting plug, likely have to be NTP style that threads in. This might be hard because of the fine threads on the tap tower.
A couple ideas anyway.

jtmwhyte · Post by **jtmwhyte** » Sat Mar 26, 2016 11:37 am

I was thinking of getting an old shank from someone and cutting it down to thread on and then put a logo on it. Lot to think about there

MitchK · Post by **MitchK** » Sat Mar 26, 2016 11:49 am

if you are handy with plumbing you could just hook up a faucet to your regular ol' tap water.

naes100 · Post by **naes100** » Sat Mar 26, 2016 12:22 pm

id just have a tap faucet and handle on it anyway and just have 2 beers hooked up

KMcK · Post by **KMcK** » Sat Mar 26, 2016 5:21 pm

A Brewnosers sticker would look good there.

Keith · Post by **Keith** » Sat Mar 26, 2016 5:38 pm

Run an external line for rinsing. Serve from the tap or from a keg.

RossBee · Post by **RossBee** » Sat Mar 26, 2016 10:10 pm

Got a dual here, was going to get a triple, wanna exchange?

jtmwhyte · Post by **jtmwhyte** » Sat Mar 26, 2016 10:14 pm

RossBee wrote:Got a dual here, was going to get a triple, wanna exchange?

Yes. Where are you located?

RossBee · Post by **RossBee** » Sat Mar 26, 2016 11:06 pm

jtmwhyte wrote:
RossBee wrote:Got a dual here, was going to get a triple, wanna exchange?
Yes. Where are you located?

Metropolis of Baie Verte, NB, right on the border with NS. If you're not in a hurry, sure we can mule it somehow.

jtmwhyte · Post by **jtmwhyte** » Sat Mar 26, 2016 11:13 pm

I'm driving through to Montreal on the evening of the 14th.maybe we could do something then

RossBee · Post by **RossBee** » Sun Mar 27, 2016 12:25 pm

jtmwhyte wrote:I'm driving through to Montreal on the evening of the 14th.maybe we could do something then

Can meet you at the Aulac Big Stop

jtmwhyte · Post by **jtmwhyte** » Sun Mar 27, 2016 2:51 pm

RossBee wrote:
jtmwhyte wrote:I'm driving through to Montreal on the evening of the 14th.maybe we could do something then
Can meet you at the Aulac Big Stop

Aulac shouldn't be a problem

3 Tap tower for 2 tap setup?

3 Tap tower for 2 tap setup?

Re: 3 Tap tower for 2 tap setup?

Re: 3 Tap tower for 2 tap setup?

Re: 3 Tap tower for 2 tap setup?

Re: 3 Tap tower for 2 tap setup?

Re: 3 Tap tower for 2 tap setup?

Re: 3 Tap tower for 2 tap setup?

Re: 3 Tap tower for 2 tap setup?

Re: 3 Tap tower for 2 tap setup?

Re: 3 Tap tower for 2 tap setup?

Re: 3 Tap tower for 2 tap setup?

Re: 3 Tap tower for 2 tap setup?

Re: 3 Tap tower for 2 tap setup?

Who is online