Hammond River Brewing

canuck · Post by **canuck** » Tue Sep 17, 2013 11:11 pm

jeffsmith wrote: Looking awesome buddy!

Thanks buddy! Still lots of little shit that needs done, ie wort chiller mounted, hoses built, power cords tidied up, etc. One step at a time though.

jeffsmith · Post by **jeffsmith** » Tue Sep 17, 2013 11:13 pm

canuck wrote:
jeffsmith wrote: Looking awesome buddy!
Thanks buddy! Still lots of little shit that needs done, ie wort chiller mounted, hoses built, power cords tidied up, etc. One step at a time though.

If you need a hand doing plumbing type stuff just give me a shout!

canuck · Post by **canuck** » Tue Sep 17, 2013 11:17 pm

jeffsmith wrote:
canuck wrote:
jeffsmith wrote: Looking awesome buddy!
Thanks buddy! Still lots of little shit that needs done, ie wort chiller mounted, hoses built, power cords tidied up, etc. One step at a time though.
If you need a hand doing plumbing type stuff just give me a shout!

Bruce is coming down on Sunday. I'm not sure what your plans for that day but would love to see you come down if you can make it.

jeffsmith · Post by **jeffsmith** » Tue Sep 17, 2013 11:36 pm

Canuck wrote:Bruce is coming down on Sunday. I'm not sure what your plans for that day but would love to see you come down if you can make it.

I'll see what I can do. Maybe we can carpool down.

canuck · Post by **canuck** » Tue Sep 17, 2013 11:49 pm

jeffsmith wrote:
Canuck wrote:Bruce is coming down on Sunday. I'm not sure what your plans for that day but would love to see you come down if you can make it.
I'll see what I can do. Maybe we can carpool down.

That would be awesome!

brufrog · Post by **brufrog** » Wed Sep 18, 2013 12:02 am

I could come over, stand around and be useless, and drink beer!

GAM · Post by **GAM** » Wed Sep 18, 2013 8:26 am

Crag

There may be a line up for that job.

Sandy

canuck · Post by **canuck** » Fri Oct 18, 2013 9:11 pm

Construction of my brewery is finally complete. Before I left for vacation, Provincial Health & Fire Inspectors were in and there were no issues with my brewery whatsoever. Now I just have to wait to receive my Provincial license, which hopefully won't take long. I am looking extremely forward to being operational soon!

Post by **mr x** » Fri Oct 18, 2013 9:12 pm

Looking great!!

Post by **LeafMan66_67** » Fri Oct 18, 2013 10:07 pm

Nice!

sleepyjamie · Post by **sleepyjamie** » Sat Oct 19, 2013 11:39 pm

Congrats

Sent from my iPhone using Tapatalk - now Free

Keith · Post by **Keith** » Sun Oct 20, 2013 12:00 am

Looks awesome. Let's hope for your license soon.

Post by **GillettBreweryCnslt** » Mon Oct 21, 2013 11:17 am

That does look awesome! Good Job.

gm- · Post by **gm-** » Mon Oct 21, 2013 1:16 pm

Looks great Shane, will have to swing by one of these days to see it in action!

Post by **chalmers** » Mon Oct 21, 2013 3:28 pm

Thanks to Canuck for the interview, we've got a post p on the blog now.

http://atlanticcanadabeerblog.wordpress ... brunswick/" onclick="window.open(this.href);return false;

canuck · Post by **canuck** » Thu Nov 07, 2013 3:59 pm

Rather then start a separate thread, I figured I post here instead. Does anyone have a good idea on how to mount a counterflow chiller to the underside of a stainless steel sink without drilling holes in the sink?

SealClubber · Post by **SealClubber** » Thu Nov 07, 2013 4:17 pm

canuck wrote:Rather then start a separate thread, I figured I post here instead. Does anyone have a good idea on how to mount a counterflow chiller to the underside of a stainless steel sink without drilling holes in the sink?

Velcro/Double sided tape!

Duct Tape

Strong magnets

JB Weld?

AllanMar · Post by **AllanMar** » Thu Nov 07, 2013 5:57 pm

Big U-Bolt to the leg of the sink?

Post by **RubberToe** » Thu Nov 07, 2013 6:02 pm

AllanMar wrote:Big U-Bolt to the leg of the sink?

U-bolt sounds like a good idea. You could also jbweld something on the underside to attach the chiller to.

Post by **hebertovich** » Mon Nov 11, 2013 11:17 am

I have some JB weld if you wanna try some Shane .... Bought it when my pool filter was leaking but never used it just bought a new filter. Not sure it would hold though that's quite heavy ?? If you had the room mounting it on the side might be better so you could see your gauge and hook up would be easier, I could give you a hand making a bracket ?

canuck · Post by **canuck** » Mon Nov 11, 2013 2:57 pm

Thanks for the suggestions, folks. Mike, I may have to take you up on that offer!

I noticed this on Home Depot's website.......wonder if it would hold my CFC?

http://www.homedepot.ca/product/velcro- ... ape/969456" onclick="window.open(this.href);return false;

Post by **mr x** » Mon Nov 11, 2013 3:48 pm

There's no way to mount it on one of the legs?

Sent from my Nexus 4 using Tapatalk 4

GuingesRock · Post by **GuingesRock** » Mon Nov 11, 2013 4:45 pm

Do you have a quick picture of the chiller and under the sink. I had a thought but don't know if it would work,

canuck · Post by **canuck** » Mon Nov 11, 2013 6:30 pm

mr x wrote:There's no way to mount it on one of the legs?

Sent from my Nexus 4 using Tapatalk 4

Possibly a U-Bolt like mentioned previously. Here's a pic if that helps.

Post by **mr x** » Mon Nov 11, 2013 6:57 pm

What's the diameter of those legs? I might have something for you.

Sent from my Nexus 4 using Tapatalk 4

Hammond River Brewing

Re: Hammond River Brewing

Re: Hammond River Brewing

Re: Hammond River Brewing

Re: Hammond River Brewing

Re: Hammond River Brewing

Re: Hammond River Brewing

Re: Hammond River Brewing

Re: Hammond River Brewing

Re: Hammond River Brewing

Re: Hammond River Brewing

Re: Hammond River Brewing

Re: Hammond River Brewing

Re: Hammond River Brewing

Re: Hammond River Brewing

Re: Hammond River Brewing

Re: Hammond River Brewing

Re: Hammond River Brewing

Re: Hammond River Brewing

Re: Hammond River Brewing

Re: Hammond River Brewing

Re: Hammond River Brewing

Re: Hammond River Brewing

Re: Hammond River Brewing

Re: Hammond River Brewing

Re: Hammond River Brewing

Who is online