Need Help IDing a Fitting
-
- Verified User
- Posts: 972
- Joined: Wed Jan 12, 2011 2:44 pm
- Name: Jason Loxton
- Location: sydney ns
Need Help IDing a Fitting
Calling Brewnosers collective wisdom!Anyone ever seen one of these and/or have any idea where to track down a fitting for the larger threaded opening. I've been trying unsuccessfully to figure it out for a while. Note the thick, angled threads. Diameter is slightly >1". 75 gallon capacity. Manufacturer is Hoover Group, 1990. Reached out to them and did not get a reply.
You do not have the required permissions to view the files attached to this post.
- know1
- Award Winner 1
- Posts: 862
- Joined: Tue May 10, 2011 9:59 pm
- Name: Jeramy Slaunwhite
- Location: Sackvegas
Re: Need Help IDing a Fitting
Looks like 3/4" NPT American standard pipe thread taper
Sent from my SM-G930W8 using Tapatalk
Sent from my SM-G930W8 using Tapatalk
Kegged: El Dorado IPA, Rocketfuel 2.0, Wet Hopped Pale, Ryrish Red, Marzen, BN Exchange Dunkel, BN Exchange NEIPA, Lies Lies Lies - Citra <0.5% ale
Fermenting: NZ Pilsner with Enigma, Strawberry brett cider
Fermenting: NZ Pilsner with Enigma, Strawberry brett cider
-
- Verified User
- Posts: 551
- Joined: Mon Mar 24, 2014 9:36 pm
- Name: Steffen Rosswog
- Location: Baie Verte, NB
Re: Need Help IDing a Fitting
Looks like 19 mm standard british thread. Good Luck.
Why brew beer I can buy?
- GAM
- Verified User
- Posts: 5403
- Joined: Wed May 18, 2011 2:50 pm
- Name: Sandy MacNeil
- Location: North End HFX
Re: Need Help IDing a Fitting
TTL at Burnside Industrial Park, 78 Burbidge Avenue, Dartmouth, NS B3B 1Z9
Could try there they know the odd stuff.
S
Could try there they know the odd stuff.
S
Who is online
Users browsing this forum: No registered users and 22 guests