Keg setup
-
- Registered User
- Posts: 48
- Joined: Fri Nov 24, 2017 10:05 pm
- Name: David Wamback
Keg setup
Hey guys,
Just looking to pick everyone’s brains, on where the best place to buy a kegging set up is?
I am looking at venturing away from the priming sugar and down the kegging road so I would need everything associated with legging.
Thanks in advance!
Sent from my iPhone using Tapatalk
Just looking to pick everyone’s brains, on where the best place to buy a kegging set up is?
I am looking at venturing away from the priming sugar and down the kegging road so I would need everything associated with legging.
Thanks in advance!
Sent from my iPhone using Tapatalk
-
- Vendor
- Posts: 187
- Joined: Sun Jul 24, 2011 3:19 pm
- Name: Patrick Walker
Re: Keg setup
Really depends on what you want.
For quality of parts used and value added, I would say Ontariobeerkegs.com
-Hose assemblies are pre assembled.
-We use German engineered and American made disconnects that are ISO and NSF approved.
-Free upgrades to stainless shanks
-Free upgrades to stainless tail pieces.
-Hoses are clamped on with correct swivel nut sizes and otiker clamps.
-We only use American made regulators that are NSF approved.
-Currently most conversions also come with a free line cleaner kit.
-Our co2 tanks use American made Sherwood valves.
-We only use Bevlex 200 beverage line which is stamped NSF.
-Our tower kits only come in Stainless steel. We do not even sell chrome plated towers.
If quality is of a concern those are the features just off the top of my head that makes our kits top of the line. You will not find a kit out there at our prices with our build quality. And if you do we will beat the price.
Cheers
Patrick
For quality of parts used and value added, I would say Ontariobeerkegs.com
-Hose assemblies are pre assembled.
-We use German engineered and American made disconnects that are ISO and NSF approved.
-Free upgrades to stainless shanks
-Free upgrades to stainless tail pieces.
-Hoses are clamped on with correct swivel nut sizes and otiker clamps.
-We only use American made regulators that are NSF approved.
-Currently most conversions also come with a free line cleaner kit.
-Our co2 tanks use American made Sherwood valves.
-We only use Bevlex 200 beverage line which is stamped NSF.
-Our tower kits only come in Stainless steel. We do not even sell chrome plated towers.
If quality is of a concern those are the features just off the top of my head that makes our kits top of the line. You will not find a kit out there at our prices with our build quality. And if you do we will beat the price.
Cheers
Patrick
- GAM
- Verified User
- Posts: 5403
- Joined: Wed May 18, 2011 2:50 pm
- Name: Sandy MacNeil
- Location: North End HFX
Re: Keg setup
I have access to some ball and pin lock kegs.
Sandy
Sandy
-
- Registered User
- Posts: 48
- Joined: Fri Nov 24, 2017 10:05 pm
- Name: David Wamback
Re: Keg setup
Thanks for the replies guys! I think I may go with the OBK set up!
Sent from my iPhone using Tapatalk
Sent from my iPhone using Tapatalk
- jacinthebox
- Award Winner 16
- Posts: 3047
- Joined: Tue Oct 16, 2012 12:44 pm
- Name: Justin
- Location: Hubley
- Contact:
Re: Keg setup
Check out Everwood Ave Brew Shop. Local and good prices
Brathair Brewing
Brew Hard...Stay Humble
Brew Hard...Stay Humble
- wcturnedec
- Award Winner 1
- Posts: 1103
- Joined: Wed Aug 27, 2014 7:44 am
- Name: Cam
- Location: Armdale
Re: Keg setup
In the same boat as jackinthebox, go to Everwood and support local when you can!
Sent from my iPhone using Tapatalk
Sent from my iPhone using Tapatalk
On tap: APA, Dubbel, Dark Mild
Fermenting: Brett Saison 2022, Schwarzbier, APA, Sour Brown,
Coming up: American Wheat (Fruited), Vienna Lager, Dortmunder
Bottled: Brett Saison 2020, Brett Saison 2021, Baltic Porter
Fermenting: Brett Saison 2022, Schwarzbier, APA, Sour Brown,
Coming up: American Wheat (Fruited), Vienna Lager, Dortmunder
Bottled: Brett Saison 2020, Brett Saison 2021, Baltic Porter
- Gunner
- Registered User
- Posts: 9
- Joined: Sat Jul 07, 2018 5:05 pm
- Name: Justin
Re: Keg setup
I brew a 5gal batch maybe once every month or two (give away some too) but I hate the bottling process... I want a dual tap kegerator and as much as I want to support local can anyone tell me why the following is not a good route?
https://www.bestbuy.ca/en-ca/product/in ... 56333.aspx?
I mean I hate conglomerates, but 479.99 with free shipping - Damn.
https://www.bestbuy.ca/en-ca/product/in ... 56333.aspx?
I mean I hate conglomerates, but 479.99 with free shipping - Damn.
- Gunner
- Registered User
- Posts: 9
- Joined: Sat Jul 07, 2018 5:05 pm
- Name: Justin
Re: Keg setup
Prolly gonna pull the trigger before the July 12 sale end-date...
-
- Verified User
- Posts: 45
- Joined: Fri Dec 29, 2017 5:07 pm
- Name: Jonathan Robertson
- Location: Timberlea, NS
Re: Keg setup
Call Everwood and inquire about the King Keg Kegerator Series 4. I just purchased a 3 tap model but they have 1-3 taps. I paid around 600+tax just for the 3 tap model, price will vary based on number of taps.
- BrewMachine
- Registered User
- Posts: 20
- Joined: Fri Apr 21, 2017 3:25 pm
- Name: Joel Richard
Re: Keg setup
Did you buy it? Looks nice.
Sent from my X30 using Tapatalk
Sent from my X30 using Tapatalk
Who is online
Users browsing this forum: No registered users and 41 guests