Page 1 of 1
Perlick 525 O rings
Posted: Fri May 08, 2020 11:23 pm
by duchesnep
Does anyone know where I could purchase O’ring kits for the 525 Perlick, everywhere I see online, OBK, etc.... are charging over 15$ - 20$ shipping on them.
Re: Perlick 525 O rings
Posted: Sat May 09, 2020 8:27 am
by Swine
I bought keg o-rings from TTL Supply in Burnside.
I suspect if you find the o-ring number, or size, they can order in as well. If you do, let us know. I've been meaning to call them as well, once I find the part number.
Re: Perlick 525 O rings
Posted: Sat May 09, 2020 8:32 am
by Swine
Found this on another forum:
525 faucets us 2 O-Rings 1/2" ID and 1/16 CS (Cross Section)
Those are the 2 that need replacing the most, there is also a very thick 0-ring that the seals the beer from coming out and a thinner, larger one, that seals to the shank.
I've only had issues with the 2 mentioned above.
If you look at the 525 build, 1 of them is item 7 I think, and that's the problem child almost every time.