Page 1 of 1
Vessel with a flat bottom
Posted: Wed Jun 04, 2014 1:04 pm
by Broob
I was making a yeast starter the other day using a one gallon glass jug and it was extremely difficult to get the magnet in the right spot as the bottom of the jug is rounded. I know I need an Erlenmeyer flask and I'm going to get one as soon as I get a chance to get out to Dave's but does anybody know of anything easy to find in the mean time that has a flat bottom and would work reasonably well to make a starter?
Re: Vessel with a flat bottom
Posted: Wed Jun 04, 2014 1:05 pm
by jeffsmith
I've used a large no-name mason-style jar in the past that worked pretty well. Picked it up at either the dollar store or Superstore, can't remember which.
Re: Vessel with a flat bottom
Posted: Wed Jun 04, 2014 1:18 pm
by Celiacbrew
do you have any flat bottom bowls or baking dishes that can sit on your stir plate? Mixing bowls are usually cupped in the right direction, but a thick base of melamine and silicone might shield the magnets. A 2 quart or larger glass measuring cup would have a flat bottom. If you aren't storing it for long it doesn't need to have a narrow top or a lid, just cover it with foil if it is in the fridge and you worry about it plastic cling wrap will give you an airtight seal.
Re: Vessel with a flat bottom
Posted: Wed Jun 04, 2014 2:23 pm
by RubberToe
What's your stir bar like? Does it have a ring in the middle? I have one without a ring that I use in mason jars, seems to work fine.
Re: Vessel with a flat bottom
Posted: Wed Jun 04, 2014 2:27 pm
by Broob
RubberToe wrote:What's your stir bar like? Does it have a ring in the middle? I have one without a ring that I use in mason jars, seems to work fine.
Has a ring in the middle. Where do you get them without the ring?
Re: Vessel with a flat bottom
Posted: Wed Jun 04, 2014 5:30 pm
by RubberToe
Mine came from Hopdawgs 3 years ago but you can probably find them elsewhere.
Sent from the brew timer.
Re: Vessel with a flat bottom
Posted: Wed Jun 04, 2014 6:16 pm
by LeafMan66_67
Got mine without the ring on eBay.
Re: Vessel with a flat bottom
Posted: Wed Jun 04, 2014 9:51 pm
by Broob
RubberToe wrote:Mine came from Hopdawgs 3 years ago but you can probably find them elsewhere.
Sent from the brew timer.
Bought a 2 L cylindrical vase from the dollar store. Bottom is slightly concave and works perfectly.
Re: Vessel with a flat bottom
Posted: Wed Jun 04, 2014 10:17 pm
by Celiacbrew
Broob wrote:RubberToe wrote:What's your stir bar like? Does it have a ring in the middle? I have one without a ring that I use in mason jars, seems to work fine.
Has a ring in the middle. Where do you get them without the ring?
Just bought a 3cm one from Dave at everwoodbrewshop when I was there tonight.