Malt Mill Motor
- Keith
- Award Winner 6
- Posts: 6479
- Joined: Mon Sep 02, 2013 3:55 pm
- Name: Keith
- Location: Lower Sackville, NS
Re: Malt Mill Motor
I've only used it once but am happy with it
Brewer, Owner & Operator @ Ol' Biddy's Brew House
- mcgster
- Award Winner 20+
- Posts: 1098
- Joined: Thu Oct 24, 2013 10:34 pm
- Name: Mark McGraw
- Location: Saint John / St. John's
Re: Malt Mill Motor
Damn, that looks awesome. What type of mill is it pushing?
Sent from my iPhone using Tapatalk
Sent from my iPhone using Tapatalk
-
- Verified User
- Posts: 228
- Joined: Fri Jun 26, 2015 6:12 pm
- Name: Ivor
- Location: Halifax
Re: Malt Mill Motor
So rather than starting another thread on this topic I thought I'd just ask here.
Do most people go with motor and sheaves or do they go with a gear reducer for their mills? Does the large sheave put additional stress on the mill bushings?
I was also wondering if you use a gear reducer what happens if you hit a rock or something in your malt? It seems like the belt on the pulley would slip if this happened rather than breaking something.
Sent from my SM-G930W8 using Tapatalk
Do most people go with motor and sheaves or do they go with a gear reducer for their mills? Does the large sheave put additional stress on the mill bushings?
I was also wondering if you use a gear reducer what happens if you hit a rock or something in your malt? It seems like the belt on the pulley would slip if this happened rather than breaking something.
Sent from my SM-G930W8 using Tapatalk
- SFR709
- Verified User
- Posts: 253
- Joined: Thu Jul 16, 2015 1:24 pm
- Name: Scott
- Location: Dartmouth
Malt Mill Motor
I believe most people go with sheaves and a belt or at least I did. Gear motors or gear reducers make for a really neat simple set up, but from my experience were pricey and much harder to come by in the correct rpm range (around 350-400rpm with the necessary power) for a grain mill.
I found you could find an electric motor in the 1/2 hp or greater range on Kijiji cheap, furnace blower motors seem to be easy to come by. I just picked up the sheaves at princess auto and used a spacer and a key way to mount them to the motor shaft, depending it might be worth your while to just get a machine shop to make you up something and save the hassle. I built mine into a child size desk on castors, it should still be kicking around the diy section under “another grain mill build” there’s some more info there as well, I’d post the link if I knew how.
In my diy build the only thing I would probably add would be an idler pulley to keep more tension on the belt, but I just put some chalk on it and it’s been going strong for a couple years. Like you mentioned it’s always a good idea to have an easily accessible three direction switch so you have reverse if you hit a stone or something. I hope this helps.
Sent from my iPhone using Tapatalk
I found you could find an electric motor in the 1/2 hp or greater range on Kijiji cheap, furnace blower motors seem to be easy to come by. I just picked up the sheaves at princess auto and used a spacer and a key way to mount them to the motor shaft, depending it might be worth your while to just get a machine shop to make you up something and save the hassle. I built mine into a child size desk on castors, it should still be kicking around the diy section under “another grain mill build” there’s some more info there as well, I’d post the link if I knew how.
In my diy build the only thing I would probably add would be an idler pulley to keep more tension on the belt, but I just put some chalk on it and it’s been going strong for a couple years. Like you mentioned it’s always a good idea to have an easily accessible three direction switch so you have reverse if you hit a stone or something. I hope this helps.
Sent from my iPhone using Tapatalk
Last edited by SFR709 on Mon Apr 02, 2018 12:59 pm, edited 1 time in total.
-
- Verified User
- Posts: 228
- Joined: Fri Jun 26, 2015 6:12 pm
- Name: Ivor
- Location: Halifax
Re: Malt Mill Motor
Thanks for the reply. Yeah I was looking at princess auto for sheaves the other day. It seems like they get pretty expensive to get a large sheave and split bushing. What size small sheave did you buy? It looks like the smallest ones they have are about 2-1/2" diameter.SFR709 wrote:I believe most people go with sheaves and a belt or at least I did. Gear motors or gear reducers make for a really neat simple set up, but from my experience were pricey and much harder to come by in the correct rpm range for a grain mill. I found you could find an electric motor in the 1/2 hp or greater range on Kijiji cheap, furnace blower motors seem to be easy to find. I just picked up the sheaves at princess auto and used a spacer and a key way to mount them to the motor shaft, depending it might be worth your while to just get a machine shop to make you up something and save the hassle. I built mine into a child size desk on castors, it should still be kicking around the diy section. I hope this helps.
Sent from my iPhone using Tapatalk
Sent from my SM-G930W8 using Tapatalk
- SFR709
- Verified User
- Posts: 253
- Joined: Thu Jul 16, 2015 1:24 pm
- Name: Scott
- Location: Dartmouth
Re: Malt Mill Motor
I just edited my original response but that diy thread I mentioned has pictures of my build. I believe I built it a couple years ago now so I don’t remember the exact sizes of everything but 2-1/2” sounds right. This is one of the pictures from the thread:
Sent from my iPhone using Tapatalk
Sent from my iPhone using Tapatalk
You do not have the required permissions to view the files attached to this post.
-
- Verified User
- Posts: 228
- Joined: Fri Jun 26, 2015 6:12 pm
- Name: Ivor
- Location: Halifax
Re: Malt Mill Motor
So if the shaft on my mill is a 1/2" shaft with one flat side (no key), do you still put a key in when you install that split bushing or does it just grab the shaft as you tighten the tapered split bushing?SFR709 wrote:I just edited my original response but that diy thread I mentioned has pictures of my.....
Sent from my iPhone using Tapatalk
Sent from my SM-G930W8 using Tapatalk
- sleepyjamie
- Award Winner 5
- Posts: 2482
- Joined: Sun Jun 12, 2011 7:05 pm
- Name: jamie
- Location: Calgary
Re: Malt Mill Motor
Be careful about the motor exploding with any grain dust.
On Tap:
Falconers Galaxy IPA
Simcoe SMaSH
Topaz SMaSH
Cranberry Rye Saison
Monde Souterrain (Dark Saison)
Falconers Galaxy IPA
Simcoe SMaSH
Topaz SMaSH
Cranberry Rye Saison
Monde Souterrain (Dark Saison)
- oceanic_brew
- Verified User
- Posts: 625
- Joined: Wed Aug 26, 2015 6:14 pm
- Name: Glen O'Keefe
Re: Malt Mill Motor
That is if you’re deciding to crush all the grain you need for the next ten years in one afternoon.sleepyjamie wrote:Be careful about the motor exploding with any grain dust.
Sent from my iPhone using Tapatalk
- CorneliusAlphonse
- Award Winner 1
- Posts: 2988
- Joined: Tue Oct 12, 2010 11:28 pm
Re: Malt Mill Motor
dust explosions are no joke. Especially if it's in a super tight space, it's something to be aware of - dust buildup on the motor. no need to laugh at reasonable precaution.oceanic_brew wrote: ↑Tue Apr 03, 2018 7:01 amThat is if you’re deciding to crush all the grain you need for the next ten years in one afternoon.sleepyjamie wrote:Be careful about the motor exploding with any grain dust.
planning: beer for my cousin's wedding
Fermenting: black ipa
Conditioning:
Kegged: barrel barleywine from 2014 - i think i still have this somewhere
Fermenting: black ipa
Conditioning:
Kegged: barrel barleywine from 2014 - i think i still have this somewhere
- sleepyjamie
- Award Winner 5
- Posts: 2482
- Joined: Sun Jun 12, 2011 7:05 pm
- Name: jamie
- Location: Calgary
Re: Malt Mill Motor
If you are crushing a bag or more I would consider one. Over time the risk of dust getting in the motor increases.oceanic_brew wrote: ↑Tue Apr 03, 2018 7:01 amThat is if you’re deciding to crush all the grain you need for the next ten years in one afternoon.sleepyjamie wrote:Be careful about the motor exploding with any grain dust.
Sent from my iPhone using Tapatalk
On Tap:
Falconers Galaxy IPA
Simcoe SMaSH
Topaz SMaSH
Cranberry Rye Saison
Monde Souterrain (Dark Saison)
Falconers Galaxy IPA
Simcoe SMaSH
Topaz SMaSH
Cranberry Rye Saison
Monde Souterrain (Dark Saison)
- oceanic_brew
- Verified User
- Posts: 625
- Joined: Wed Aug 26, 2015 6:14 pm
- Name: Glen O'Keefe
Re: Malt Mill Motor
It certainly doesn’t hurt to be careful of things that’s for suresleepyjamie wrote:If you are crushing a bag or more I would consider one. Over time the risk of dust getting in the motor increases.oceanic_brew wrote: ↑Tue Apr 03, 2018 7:01 amThat is if you’re deciding to crush all the grain you need for the next ten years in one afternoon.sleepyjamie wrote:Be careful about the motor exploding with any grain dust.
Sent from my iPhone using Tapatalk
Sent from my iPhone using Tapatalk
- know1
- Award Winner 1
- Posts: 862
- Joined: Tue May 10, 2011 9:59 pm
- Name: Jeramy Slaunwhite
- Location: Sackvegas
Re: Malt Mill Motor
A malt dust explosion is highly unlikely in a homebrew scale however, fire from accumulated dust around open motors and electrical components is quite possible.
Keep everything clean from buildup, a good brewery rule anyway and if you regularly mill more than a 5-10 gallon batch worth you might want to consider rigging up a collar below the mill with shop vac. Stray malt dust also contains lactobacillus so its an added prevention of contamination control.
Keep everything clean from buildup, a good brewery rule anyway and if you regularly mill more than a 5-10 gallon batch worth you might want to consider rigging up a collar below the mill with shop vac. Stray malt dust also contains lactobacillus so its an added prevention of contamination control.
Kegged: El Dorado IPA, Rocketfuel 2.0, Wet Hopped Pale, Ryrish Red, Marzen, BN Exchange Dunkel, BN Exchange NEIPA, Lies Lies Lies - Citra <0.5% ale
Fermenting: NZ Pilsner with Enigma, Strawberry brett cider
Fermenting: NZ Pilsner with Enigma, Strawberry brett cider
- know1
- Award Winner 1
- Posts: 862
- Joined: Tue May 10, 2011 9:59 pm
- Name: Jeramy Slaunwhite
- Location: Sackvegas
Re: Malt Mill Motor
Along the lines of mill motors, eventually I plan to rig up my mill to a motor from a dissected free kijiji tread mill and use the built in controls to regulate the speed.
Kegged: El Dorado IPA, Rocketfuel 2.0, Wet Hopped Pale, Ryrish Red, Marzen, BN Exchange Dunkel, BN Exchange NEIPA, Lies Lies Lies - Citra <0.5% ale
Fermenting: NZ Pilsner with Enigma, Strawberry brett cider
Fermenting: NZ Pilsner with Enigma, Strawberry brett cider
-
- Verified User
- Posts: 228
- Joined: Fri Jun 26, 2015 6:12 pm
- Name: Ivor
- Location: Halifax
Re: Malt Mill Motor
Yeah if I can get an explosion proof motor I'd take it for sure but I've just been watching Kijiji for one. I'll probably mount the motor on top of the table so grain dust shouldn't be too much of an issue. I could see dust being more of an issue with the motor mounted down below.
Sent from my SM-G930W8 using Tapatalk
Sent from my SM-G930W8 using Tapatalk
- SFR709
- Verified User
- Posts: 253
- Joined: Thu Jul 16, 2015 1:24 pm
- Name: Scott
- Location: Dartmouth
Re: Malt Mill Motor
Hasn’t been an issue for me at all over the last couple years. Although I place a bucket in under my setup and it’s quite close to the outlet of my mill. It sorta looks like the motor in my mill is dirty from the pictures I’ve posted, but it’s not from grain dust it was previously used for a pottery wheel and I just didn’t clean it up.
Sent from my iPhone using Tapatalk
Sent from my iPhone using Tapatalk
Who is online
Users browsing this forum: No registered users and 15 guests