My BIAB controller build

Talk about your equipment builds/modifications here
Post Reply
TallDan
Verified User
Verified User
Posts: 16
Joined: Thu Jan 19, 2017 9:19 pm
Name: Daniel Cormier

My BIAB controller build

Post by TallDan » Fri Jan 20, 2017 11:24 am

I plan on starting 2.5 gallon batches on a electric BIAB system. I finished my controller and thought I should post some pictures. The front is a 3 way switch that controls the outlet plug (on/off/PID controlled for mashing). The green light is a power indicator. The bottom also has three way switch for the alarms. I got a two prong XLR connector for the temperature probe. This was my first attempt at this type of project so any kind of feedback or recommendations would be greatly appreciated.
You do not have the required permissions to view the files attached to this post.

User avatar
MacMan
Registered User
Registered User
Posts: 28
Joined: Fri Jan 13, 2017 11:50 am
Name: Andy

Re: My BIAB controller build

Post by MacMan » Fri Jan 20, 2017 5:06 pm

Very cool :)


Sent from my iPhone using Tapatalk

RyanC
Registered User
Registered User
Posts: 2
Joined: Mon Mar 27, 2017 9:30 pm
Name: Ryan Coles

Re: My BIAB controller build

Post by RyanC » Mon Mar 27, 2017 9:48 pm

What are you using for components? I'm looking to build something similar and am wondering what are my best options for getting the parts.

TallDan
Verified User
Verified User
Posts: 16
Joined: Thu Jan 19, 2017 9:19 pm
Name: Daniel Cormier

Re: My BIAB controller build

Post by TallDan » Wed Nov 01, 2017 12:44 pm

Hey RyanC,

Sorry for the late reply but alot of the electronic parts come from AliExpress.com ... They sell alot of cheap stuff direct from China (PID, LED indicator light, switches, ...)

wader98
Verified User
Verified User
Posts: 101
Joined: Thu Jun 12, 2014 8:22 pm
Name: Wade

Re: My BIAB controller build

Post by wader98 » Mon Nov 06, 2017 4:03 pm

Hey Dan,
i know this is an old thread but i also just finished a control box for a 2.5 Gallon EBIAB.
Just wondering if you've played with the setting on the inkbird yet? Also wondering what size kettle your using and if your doing sparges or not.

TallDan
Verified User
Verified User
Posts: 16
Joined: Thu Jan 19, 2017 9:19 pm
Name: Daniel Cormier

Re: My BIAB controller build

Post by TallDan » Mon Nov 06, 2017 5:29 pm

I started playing around with the PID about a week ago trying to familiarize myself with it.

I just have a 5 gallon kettle. From what I read that should be big enough for 2m5 gallon batches.

I don't plan on sparging (at least not to start). Might explore this option later on to see how it affects efficiency.

I have almost everything I need to do my first batch on this system so hopefully I'll get one done soon.


How about yourself. Have you been able to test your system? Have you brewed with it yet?

Sent from my Nexus 6P using Tapatalk


User avatar
RubberToe
Award Winner 13
Award Winner 13
Posts: 3460
Joined: Mon Mar 14, 2011 9:47 am
Name: Rob
Location: Dartmouth
Contact:

Re: My BIAB controller build

Post by RubberToe » Mon Nov 06, 2017 8:31 pm

I like the way you mounted your heat sink through the enclosure. I might have to try that sometime.
Electric Brewery Build
Sanke Keg Solera Project
Twitter | Flickr Photos (beer and peppers)
On tap at RubberToe's:
Munich Dunkel, Belgian Mild, Preachy Keen, Kombucha, Epic Lemonade
In the fermenter:
Lambic, An experiment

wader98
Verified User
Verified User
Posts: 101
Joined: Thu Jun 12, 2014 8:22 pm
Name: Wade

Re: My BIAB controller build

Post by wader98 » Mon Nov 06, 2017 9:26 pm

TallDan wrote:
Mon Nov 06, 2017 5:29 pm
I started playing around with the PID about a week ago trying to familiarize myself with it.

I just have a 5 gallon kettle. From what I read that should be big enough for 2m5 gallon batches.

I don't plan on sparging (at least not to start). Might explore this option later on to see how it affects efficiency.

I have almost everything I need to do my first batch on this system so hopefully I'll get one done soon.


How about yourself. Have you been able to test your system? Have you brewed with it yet?

Sent from my Nexus 6P using Tapatalk
My set up isn't pretty but everything seems to work.
I also have a 5 Gallon kettle with a 1500 Watt Element and i use a 1200 Watt Induction element to help with the boil. I'm hoping it will be big enough to get 2.75 Gallons in the fermenter. I don't have a pump yet so i haven't been able give it a go.
You do not have the required permissions to view the files attached to this post.

TallDan
Verified User
Verified User
Posts: 16
Joined: Thu Jan 19, 2017 9:19 pm
Name: Daniel Cormier

Re: My BIAB controller build

Post by TallDan » Mon Nov 06, 2017 10:38 pm

RubberToe wrote:I like the way you mounted your heat sink through the enclosure. I might have to try that sometime.
Thanks ... I got the idea from someone on YouTube. When everything is closed it looks neat and stays secured.

Sent from my Nexus 6P using Tapatalk


TallDan
Verified User
Verified User
Posts: 16
Joined: Thu Jan 19, 2017 9:19 pm
Name: Daniel Cormier

Re: My BIAB controller build

Post by TallDan » Mon Nov 06, 2017 10:45 pm

wader98 wrote:
TallDan wrote:
Mon Nov 06, 2017 5:29 pm
I started playing around with the PID about a week ago trying to familiarize myself with it.

I just have a 5 gallon kettle. From what I read that should be big enough for 2m5 gallon batches.

I don't plan on sparging (at least not to start). Might explore this option later on to see how it affects efficiency.

I have almost everything I need to do my first batch on this system so hopefully I'll get one done soon.


How about yourself. Have you been able to test your system? Have you brewed with it yet?

Sent from my Nexus 6P using Tapatalk
My set up isn't pretty but everything seems to work.
I also have a 5 Gallon kettle with a 1500 Watt Element and i use a 1200 Watt Induction element to help with the boil. I'm hoping it will be big enough to get 2.75 Gallons in the fermenter. I don't have a pump yet so i haven't been able give it a go.
Looks good. I saw a few control boxes made from tool boxes and ammo boxes. I like the idea of repurposing them for a brew controller.

Sent from my Nexus 6P using Tapatalk


Post Reply

Return to “DIY - Do It Yourself”

Who is online

Users browsing this forum: D.Pepper and 3 guests