Page 1 of 1
Auber EZBoil vs. PID
Posted: Thu Oct 13, 2016 8:45 pm
by jason.loxton
Hey engineers! Someone want to explain why this is different than a PID and why I might want to go one way or the other? (Read Auber's text, but still uncertain on how these units actually opperate relative to a PID.)
http://www.auberins.com/index.php?main_ ... cts_id=560" onclick="window.open(this.href);return false;
Re: Auber EZBoil vs. PID
Posted: Fri Oct 14, 2016 5:51 am
by Dustin
jason.loxton wrote:Hey engineers! Someone want to explain why this is different than a PID and why I might want to go one way or the other? (Read Auber's text, but still uncertain on how these units actually opperate relative to a PID.)
http://www.auberins.com/index.php?main_ ... cts_id=560" onclick="window.open(this.href);return false;
I have the SYL-2352.
I see a few added features on the EZboil:
- the automatic reduction in power once boil is reached
- the timer feature that ends the boil after a set amount of time
- dial adjustment vs buttons
To me these would be nice to have but not necessary. I find I am always around my kettle during these events anyway. Watching for boil overs and for hop additions. If this was available when I built my system I probably would have chosen it over the SYL-2352.
Dustin
Sent from my SM-G900W8 using Tapatalk