Mill Cabinet/Homebrew Storage Project
Posted: Sat Dec 03, 2016 1:48 pm
For quite a while, I've had lots of little homebrew related equipment hanging out in buckets between uses, and keeping it altogether was a pain for me. When I was able to brew in the kitchen, before I was banished to the garage I stored them in a kitchen cabinet. Simple enough, but my garage is low on cabinets, and less so dedicated homebrew gear cabinets. I had to make a solution to keep most of the stuff all in one place. After a sketch and trip to Home Depot I was ready to tackle it.
The 4ft countertop hangs off the side so that a bar stool can sit underneath the overhang and be able to work at comfortably.
I was able to integrate the mill into the countertop and have a dedicated cabinet to keep the dust down. The countertop gives me way more space to work on, and I can control the mill speed with a dimmer switch off the side of the cabinet that powers the drill. When brewday is all done, I can pack it up and roll it away for the next day.
Cheers!
The 4ft countertop hangs off the side so that a bar stool can sit underneath the overhang and be able to work at comfortably.
I was able to integrate the mill into the countertop and have a dedicated cabinet to keep the dust down. The countertop gives me way more space to work on, and I can control the mill speed with a dimmer switch off the side of the cabinet that powers the drill. When brewday is all done, I can pack it up and roll it away for the next day.
Cheers!