Page 1 of 1

New beer fridge build

Posted: Sat Jan 26, 2019 3:22 pm
by HotBreak
So, for years I have had a traditional fridge with taps out the side and a drip tray. It served me well and has since moved onto a new home for someone else to enjoy.
Last summer I decided I needed a bigger fridge to go along with my bigger 30 gallon system that has been in the works for 2 years. After all, with each batch producing 6 kegs, I needed the storage room and the option of serving from more than 3 kegs.
Along came the opportunity to buy a perlick 3 door fridge with no towers or gas system and I was inspired to do a custom built keg fridge.

With no taps or towers, I decided on an industrial look and set out to get some 3” steel pipe cut to match the holes in the top of the fridge. While I initially planned on 6 taps, spacing my handles required me to knock it down to 5.

Feeding from a 20lb CO2 bottle and a double reg setup I can now dispense from 5 kegs while simultaneously carbonating 6 chilled ones and have space left over for storage or lagering since total space allows for 16 kegs to fit inside.

Still to come is the drip tray. Since it is 26” between the center of each vertical pipe, it will need to be at least 30” wide!
Image

Re: New beer fridge build

Posted: Sat Jan 26, 2019 8:13 pm
by HotBreak
Can’t seem to get the pictures to attach

Re: New beer fridge build

Posted: Fri Feb 01, 2019 10:02 am
by elreplica
Looks like a nice unit...

Re: New beer fridge build

Posted: Fri Feb 01, 2019 4:30 pm
by RossBee
Nice!! Viewbids had bunch of these fridges last fall, t'was very tempting to get one.

Re: New beer fridge build

Posted: Fri Feb 01, 2019 4:50 pm
by HotBreak
That’s where this came from in a roundabout way