Cost of a BIAB setup?

Discuss all things BIAB (Brew In A Bag)
Post Reply
RothesayBrew
Registered User
Registered User
Posts: 16
Joined: Mon Mar 03, 2014 8:43 am
Name: Anthony

Cost of a BIAB setup?

Post by RothesayBrew » Thu Oct 16, 2014 4:14 pm

Trying to calculate the costs of going all grain from Coopers and Festabrew. Am I far off?
I know that all grain will lead to cheaper and better brews, but there is a significant initial investment and a time investment.

Brew Kettle: $60
Wort Chiller: $50 (DIY)
Mesh Bag: $10
Propane Burner: $40-$60 (plus tank, no bbq right now)
Thermometer: $10-$20?


Total around: $180-$200

RothesayBrew
Registered User
Registered User
Posts: 16
Joined: Mon Mar 03, 2014 8:43 am
Name: Anthony

Re: Cost of a BIAB setup?

Post by RothesayBrew » Thu Oct 16, 2014 4:15 pm

Sorry guys, long day. Just read the intro to this sub-forum. Seems I'm pretty close.

chalmers
Moderator
Moderator
Posts: 5602
Joined: Thu Sep 23, 2010 4:17 pm
Name: Chris
Location: Halifax / On The Road Again
Contact:

Re: Cost of a BIAB setup?

Post by chalmers » Thu Oct 16, 2014 5:23 pm

I think your numbers sound pretty right on to me. A properly fitting BIAB can be had for less than $30, custom to your exact pot size.

chalmers
Moderator
Moderator
Posts: 5602
Joined: Thu Sep 23, 2010 4:17 pm
Name: Chris
Location: Halifax / On The Road Again
Contact:

Re: Cost of a BIAB setup?

Post by chalmers » Thu Oct 16, 2014 5:23 pm

Hydrometer is a good idea too.

chalmers
Moderator
Moderator
Posts: 5602
Joined: Thu Sep 23, 2010 4:17 pm
Name: Chris
Location: Halifax / On The Road Again
Contact:

Re: Cost of a BIAB setup?

Post by chalmers » Thu Oct 16, 2014 5:23 pm

(Though you may already have one)

User avatar
Jimmy
Site Admin Award Winner
Site Admin Award Winner
Posts: 6984
Joined: Wed Sep 22, 2010 6:35 pm
Location: Halifax, NS

Re: Cost of a BIAB setup?

Post by Jimmy » Thu Oct 16, 2014 5:28 pm

If you're doing a small batch the paint strainer bags work fine, if you're doing 5g batches, you'll want something bigger.

Sent from my Nexus 5 using Tapatalk

User avatar
CorneliusAlphonse
Award Winner 1
Award Winner 1
Posts: 2988
Joined: Tue Oct 12, 2010 11:28 pm

Re: Cost of a BIAB setup?

Post by CorneliusAlphonse » Thu Oct 16, 2014 5:41 pm

There are cheaper ways to do a 5gallon all grain batch (2x20L pot on stove top, cuts out burner and propane) but it is pretty frustrating and you don't get anywhere near the same precision. I did it for a few batches then got the big pot and burner. No regrets and that's coming from someone who moves a lot!
planning: beer for my cousin's wedding
Fermenting: black ipa
Conditioning:
Kegged: barrel barleywine from 2014 - i think i still have this somewhere

User avatar
GuingesRock
Award Winner 20+
Award Winner 20+
Posts: 5190
Joined: Wed May 29, 2013 2:26 pm
Name: Mark
Location: Wolfville, NS

Re: Cost of a BIAB setup?

Post by GuingesRock » Thu Oct 16, 2014 5:59 pm

I think you can do 5 gal BIAB on the stove. Depends what kind of stove. If you have a small stove with those coil elements I think you can get a pot with a big enough base to sit on more than one ring ...might be worth investigating. I've seen pictures on the net of that being done. I did many many 10 gal batches on a single burner of a ceramic hot plate. That burner is 2700W.
You do not have the required permissions to view the files attached to this post.
-Mark
2nd place, Canadian Brewer of the Year, 2015
101 awards won for beers designed and brewed.
Cicerone Program - Certified Beer Server

User avatar
CorneliusAlphonse
Award Winner 1
Award Winner 1
Posts: 2988
Joined: Tue Oct 12, 2010 11:28 pm

Re: Cost of a BIAB setup?

Post by CorneliusAlphonse » Thu Oct 16, 2014 6:35 pm

I did one batch on stove top with a large pot, before getting a propane burner. Took crazy long to heat up - like put a blanket over it and it took 45 minutes to go from sparge temp to boil.
planning: beer for my cousin's wedding
Fermenting: black ipa
Conditioning:
Kegged: barrel barleywine from 2014 - i think i still have this somewhere

User avatar
GuingesRock
Award Winner 20+
Award Winner 20+
Posts: 5190
Joined: Wed May 29, 2013 2:26 pm
Name: Mark
Location: Wolfville, NS

Re: Cost of a BIAB setup?

Post by GuingesRock » Thu Oct 16, 2014 6:43 pm

Liam, so what's the time saving getting a burner vs. using the stove? 20 - 30 mins? then once you have a burner, you are committed to brewing outside, all weathers, unless you have a garage with a door you can open.
-Mark
2nd place, Canadian Brewer of the Year, 2015
101 awards won for beers designed and brewed.
Cicerone Program - Certified Beer Server

User avatar
CorneliusAlphonse
Award Winner 1
Award Winner 1
Posts: 2988
Joined: Tue Oct 12, 2010 11:28 pm

Re: Cost of a BIAB setup?

Post by CorneliusAlphonse » Thu Oct 16, 2014 6:59 pm

honestly, for a 5 gallon batch, each of the heating steps is about 15 minutes (tap to mash temp, mash temp to boil), vs 45 each on the stove top. so you save an hour of sitting around waiting for stuff to heat. the other disadvantage of doing it inside is wiping condensation off your ceiling.

not trying to pooh-pooh the stovetop brewing, it is certainly an option and that's why i brought it up. but i have not done it even a single time since getting my burner 2 years ago, even though i use the same equipment. brewing outside isn't a problem, just set it up whereever. you only have to attend to it during heating so that it doesnt boil over.
planning: beer for my cousin's wedding
Fermenting: black ipa
Conditioning:
Kegged: barrel barleywine from 2014 - i think i still have this somewhere

User avatar
GuingesRock
Award Winner 20+
Award Winner 20+
Posts: 5190
Joined: Wed May 29, 2013 2:26 pm
Name: Mark
Location: Wolfville, NS

Re: Cost of a BIAB setup?

Post by GuingesRock » Thu Oct 16, 2014 7:16 pm

That sounds like an accurate account. I got used to the time. I now have an boil coil element in my big pot and use that in conjunction with the stove and it speeds things up nicely. I leave the kitchen door open to the outside to avoid steaming up. Even on the coldest winter days, although I don't leave it wide open. Lets some of the heat out from the boiling pot as well as the steam.
-Mark
2nd place, Canadian Brewer of the Year, 2015
101 awards won for beers designed and brewed.
Cicerone Program - Certified Beer Server

User avatar
mcgster
Award Winner 20+
Award Winner 20+
Posts: 1098
Joined: Thu Oct 24, 2013 10:34 pm
Name: Mark McGraw
Location: Saint John / St. John's

Re: Cost of a BIAB setup?

Post by mcgster » Thu Oct 16, 2014 7:46 pm

If you are handy you could build a heat stick for around 60$ and stick with brewing inside.

I use stove top + 1500W heat stick for my batches because i like to brew inside. I find it works great. I will add that the propane burner is definitely a more traditional route to go.. i just love the heat stick approach.

User avatar
Jimmy
Site Admin Award Winner
Site Admin Award Winner
Posts: 6984
Joined: Wed Sep 22, 2010 6:35 pm
Location: Halifax, NS

Re: Cost of a BIAB setup?

Post by Jimmy » Thu Oct 16, 2014 8:11 pm

I brewed inside once without proper ventilation. First and last time :lol:

Sent from my Nexus 5 using Tapatalk

User avatar
mcgster
Award Winner 20+
Award Winner 20+
Posts: 1098
Joined: Thu Oct 24, 2013 10:34 pm
Name: Mark McGraw
Location: Saint John / St. John's

Re: Cost of a BIAB setup?

Post by mcgster » Thu Oct 16, 2014 8:16 pm

Jimmy wrote:I brewed inside once without proper ventilation. First and last time :lol:

Sent from my Nexus 5 using Tapatalk
Good point!

If you have a range hood that is vented outside it goes a long way. A recirculation range hood won't cut it though.

User avatar
Jimmy
Site Admin Award Winner
Site Admin Award Winner
Posts: 6984
Joined: Wed Sep 22, 2010 6:35 pm
Location: Halifax, NS

Re: Cost of a BIAB setup?

Post by Jimmy » Thu Oct 16, 2014 9:01 pm

mcgster wrote:
Jimmy wrote:I brewed inside once without proper ventilation. First and last time :lol:

Sent from my Nexus 5 using Tapatalk
Good point!

If you have a range hood that is vented outside it goes a long way. A recirculation range hood won't cut it though.
Not that you *can't* brew without proper ventilation, but after seeing the amount of steam floating around inside I said I would never do it again!

User avatar
mcgster
Award Winner 20+
Award Winner 20+
Posts: 1098
Joined: Thu Oct 24, 2013 10:34 pm
Name: Mark McGraw
Location: Saint John / St. John's

Re: Cost of a BIAB setup?

Post by mcgster » Thu Oct 16, 2014 9:04 pm

Yes.. and the consequences can be bad with the significant other lol .

User avatar
CorneliusAlphonse
Award Winner 1
Award Winner 1
Posts: 2988
Joined: Tue Oct 12, 2010 11:28 pm

Re: Cost of a BIAB setup?

Post by CorneliusAlphonse » Thu Oct 16, 2014 9:04 pm

Towel off the ceiling is always fun.

Mcgster I am actually intending to put together a heat stick soon. Any suggestions on where to look for a how to type of thing? Just want to make a 1500W one or whatever will work on a typical 15A circuit without tripping the breaker.
planning: beer for my cousin's wedding
Fermenting: black ipa
Conditioning:
Kegged: barrel barleywine from 2014 - i think i still have this somewhere

User avatar
mcgster
Award Winner 20+
Award Winner 20+
Posts: 1098
Joined: Thu Oct 24, 2013 10:34 pm
Name: Mark McGraw
Location: Saint John / St. John's

Re: Cost of a BIAB setup?

Post by mcgster » Thu Oct 16, 2014 9:13 pm

I went a bit overboard on my heat stick because i didn't like the designs that required sealing of the element with an epoxy.

I built mine out of parts ordered from Still Dragon. Its basically just the element guard kit that he sells with a 2" TC 90 degree elbow and a 2" piece of straight TC pipe.

I plan on building another one soon, the heat transfer of the submerged element is so much better than you get on a Stovetop. I am going to change my design somewhat for the next one and reduce the pipe down. You have to use 2" pipe to get the element to fit but after the 90 you could go to any pipe size you want.

I originally built this to supplement the 5500W element on my 100L setup at home but now i use it for my stovetop brews in NFLD.
IMG_3125.jpg
IMG_3126.jpg
You do not have the required permissions to view the files attached to this post.

Post Reply

Return to “BIAB Discussion”

Who is online

Users browsing this forum: No registered users and 10 guests