SOLD: 50' x 3/8" SS Immersion Chiller
Posted: Wed Nov 15, 2017 11:21 pm
I bought this chiller in spring of 2016 before I committed to 5 gallon batches in a 10 gallon pot. It works great, but it's somewhat overbalanced in my rig. Performance obviously depends on groundwater temperature, flow rate and agitation, but when I really gave 'er in cold weather conditions, 5 gallons was chilled to pitching temps in 10-15 minutes.
This was purchased from Dave@Everwood although it's not listed on his site anymore; the version with direct garden hose fittings (as opposed to vinyl tubing) is here. This one has the input/output tubes welded together (although the weld ain't pretty) as opposed to strapped together.
Asking $80.
Specs:
This was purchased from Dave@Everwood although it's not listed on his site anymore; the version with direct garden hose fittings (as opposed to vinyl tubing) is here. This one has the input/output tubes welded together (although the weld ain't pretty) as opposed to strapped together.
Asking $80.
Specs:
- Material: Stainless Steel
- Tubing length: 50ft.
- Tubing diameter: 3/8in.
- Coil height: ~8in.
- Coil Outer Diameter: ~10in.
- Total height: ~24in.
- Connections: vinyl tubing (~8ft.) with Garden hose connector on input
