LF: 1bbl mash tun and kettle
-
- Verified User
- Posts: 74
- Joined: Thu Feb 16, 2017 1:32 pm
- Name: Corey Smith
LF: 1bbl mash tun and kettle
Looking to increase capacity a bit for the summer. Before I buy new, anyone around upgrading soon?
-
- Verified User
- Posts: 972
- Joined: Wed Jan 12, 2011 2:44 pm
- Name: Jason Loxton
- Location: sydney ns
Re: LF: 1bbl mash tun and kettle
Upgrading!!?! From 1 bbl? To... a full professional brewery?
-
- Registered User
- Posts: 9
- Joined: Wed Sep 13, 2017 4:09 pm
- Name: Tony
- Location: Halifax
Re: LF: 1bbl mash tun and kettle
Word on the street is Dave at everwood will be getting in some big kettles soon. I'm waiting on the order so I can buy a 20/30 gal for my 3 tier setup.
- mccutheon
- Verified User
- Posts: 23
- Joined: Mon Oct 27, 2014 9:46 am
- Name: Thomas
Re: LF: 1bbl mash tun and kettle
Figure I'd add this here in case anyone was interested. I purchased 3 30 Gallon pots from Dave a few years ago to use in a 3 vessel set up, and only ended up using a single pot, for BIAB. The 2 pots have never been brewed in (lid of one needs a light cleaning), and they have holes already drilled for various attachments.
Left pot was drilled with the intentions of being an HLT :
-2 holes for 1/2" bulkheads for HERMS
-Ball Valve
-Sight Glass
-Temp probe
Right pot was drilled with intentions of KETTLE :
-Ball Valve
-Sight Glass
-Temp Probe
-Hole at top for transfer hose to whirlpool arm
2 x 30 gallon pots
50 ft 1/2" steels HERMS coil, never used
2 x 1/2" HERMS bulkheads, never used
chugger pump, never used
------------------
Left pot was drilled with the intentions of being an HLT :
-2 holes for 1/2" bulkheads for HERMS
-Ball Valve
-Sight Glass
-Temp probe
Right pot was drilled with intentions of KETTLE :
-Ball Valve
-Sight Glass
-Temp Probe
-Hole at top for transfer hose to whirlpool arm
2 x 30 gallon pots
50 ft 1/2" steels HERMS coil, never used
2 x 1/2" HERMS bulkheads, never used
chugger pump, never used
------------------
- GAM
- Verified User
- Posts: 5403
- Joined: Wed May 18, 2011 2:50 pm
- Name: Sandy MacNeil
- Location: North End HFX
Re: LF: 1bbl mash tun and kettle
How much for the Chugger?
S
S
-
- Verified User
- Posts: 105
- Joined: Mon Jan 12, 2015 12:22 pm
- Name: Brent Darbyson
Re: LF: 1bbl mash tun and kettle
If thirsty doesn’t take the setup put me second in line for it.
-
- Verified User
- Posts: 74
- Joined: Thu Feb 16, 2017 1:32 pm
- Name: Corey Smith
Re: LF: 1bbl mash tun and kettle
Go for it. I'm holding out for something bigger.B-boy wrote:If thirsty doesn’t take the setup put me second in line for it.
Sent from my BBB100-1 using Tapatalk
-
- Registered User
- Posts: 7
- Joined: Wed Feb 03, 2016 10:13 pm
- Name: Shawny MacD
Re: LF: 1bbl mash tun and kettle
@mccutheon - do you still have the two pots, herms coil, pump, and other assorted gear? I would be interested.
Who is online
Users browsing this forum: No registered users and 18 guests