Grain Mill

[Graham.C]

Canadian Homebrew Supplies is putting these on sale for 15% off over November 5th-15th.
http://www.homebrew-supplies.ca/viartsh ... tem_id=366" onclick="window.open(this.href);return false;

I need a mill, is this a good deal? They have others going on sale, but they all seem overkill.

[mr x]

I have the 3 roller type, and love it, but it pretty much need s a dedicated motor set-up. I think a 2 roll adjustable is fine.

[jeffsmith]

I was planning on getting myself a Barley Crusher. I'm assuming it's of relatively similar quality? One advantage I'm seeing about it over the Crankandstein is that it comes with the base and 7lb. hopper included. It's also about $20 cheaper, but with the 15% off that's a moot point.

[Keggermeister]

I have the 3 roller type, and love it, but it pretty much need s a dedicated motor set-up. I think a 2 roll adjustable is fine.

Same here, I have the cgm 3-d motorized on a stand. You should use 1/2hp for a motor.

[Graham.C]

I guess the biggest difference is the adjustable feature on the crankandstein. I know different crushes can result in very different worts, but I have no idea if giving myself this extra level of control is a good idea or bad. Seems to me its just one more variable I can play with, so its probably worth having to build my own hopper, although if we can save on shipping maybe we should order together.

I was also wondering how the community felt about control over their crush sizes.

[JohnnyMac]

I have the 3 roller type, and love it, but it pretty much need s a dedicated motor set-up. I think a 2 roll adjustable is fine.

Same here, I have the cgm 3-d motorized on a stand. You should use 1/2hp for a motor.

I've got the 3D model as well and motorized it a while back. Works fantastic and the gap is super adjustable.

[mr x]

I like being able to control the gap, but who knows how big a difference it makes once you are smashing open the kernels. It is useful on hard wheat berries where a double crush is nice.

[derek]

I guess the biggest difference is the adjustable feature on the crankandstein. I know different crushes can result in very different worts, but I have no idea if giving myself this extra level of control is a good idea or bad.

LOL. I have a fixed two-roller crusher, and have already thought about that. At this stage, I figure it's keeping me out of trouble. One day, when I want the additional level of control, I'll either sell this one and get an adjustable, or borrow someone else's, but for now, I need all the repeatability I can get...

[Tony L]

Sould have looked to see if mill was already a topic before posting to a new thread, but anyway, here is a link to what looks like a Chinese knock off of the BC http://www.homebrewing.org/Cereal-Kille ... _2310.html" onclick="window.open(this.href);return false;

[Graham.C]

Sould have looked to see if mill was already a topic before posting to a new thread, but anyway, here is a link to what looks like a Chinese knock off of the BC http://www.homebrewing.org/Cereal-Kille ... _2310.html" onclick="window.open(this.href);return false;

Has anyone tried this? Its a much better price, but hows the quality?

[CorneliusAlphonse]

when I checked the US barley crusher site, the prices looked about the same as the Cereal Killer price. (ie, $100 for the two-roller mill, instead of 160.) http://www.crankandstein.net/index.php? ... ucts_id=10" onclick="window.open(this.href);return false;

[Graham.C]

when I checked the US barley crusher site, the prices looked about the same as the Cereal Killer price. (ie, $100 for the two-roller mill, instead of 160.) http://www.crankandstein.net/index.php? ... ucts_id=10" onclick="window.open(this.href);return false;

whats the differance between that and rhis one for $79? http://www.crankandstein.net/index.php? ... ucts_id=12" onclick="window.open(this.href);return false;

[mr x]

Sounds like you have to remove the bearings to set the gap. Not something easy to mess with. But if you're like me, I only change that gap once a year, maybe.....

[erslar00]

2A
$99.00
Fully adjustable for a parallel or tapered gap. Dual eccentric stainless steel bearing adjusters are connected with a crossbar and held in place by set screws. Factory preset .045" Adjustment ranges from .010" to .080". Two rollers 5" long, 1.5" diameter, cold rolled steel, diamond knurled pattern w/grain-engaged gear teeth at ends. Aluminum frames, SAE-841 bronze bearings, eight 1/4"-20 mounting holes for sturdy versatile setup, bolts included. Tool-steel driveshaft 3/8" diameter with 3 flats for positive drill chuck attachment. Precisely sized, trued and polished axles spin freely with minimal wear.
This is a basic grain mill guts kit with instructions ready for you to add a base, hopper and drive source.
You can get this mill and the base and hopper and have a complete setup for $139.00 plus shipping.
Factory-direct & brand new.

2S
$79.00
A basic mill with a settable gap. Dual eccentric bearings can be removed, turned and locked back in place to adjust gap. Factory preset .045" Adjustment ranges from .025" to .065". Two rollers 4" long, 1.5" diameter, cold rolled steel, diamond knurled pattern w/grain-engaged gear teeth at ends Aluminum frames, SAE-841 bronze bearings, eight 1/4"-20 mounting holes for sturdy versatile setup, bolts included Tool-steel driveshaft 3/8" diameter with 3 flats for positive drill chuck attachment Precisely sized, trued and polished axles spin freely with minimal wear This is a basic grain mill guts kit with instructions ready for you to add a base, hopper and drive source. Factory-direct & brand new.

This looks like a really affordable option... How hard can it be to add on the base and hopper? From the one's I've seen at NG they just look like they're mounted on to plywood squares... as well, If Mr. X is right and you're not changing or adjusting your gap everyday then.. the $79. looks like a good way to go.... I'm definitely keeping it as oneo f my options... as opposed to a Corona Mill... for that price difference.

[mr x]

Base and hopper are too easy. For a hopper, I just use a plastic 5 gallon water jug. I cut a slot in the neck for a flow gate.

[KMcK]

If you guys are serious about crushing, check out http://halifax.kijiji.ca/c-buy-and-sell ... Z325889336" onclick="window.open(this.href);return false;.

[Graham.C]

If you guys are serious about crushing, check out http://halifax.kijiji.ca/c-buy-and-sell ... Z325889336" onclick="window.open(this.href);return false;.

If only I had the space.

[macdonaldtomw]

Here's something I found about the Cereal Killer... the guy who was going to buy it still hasn't posted with his review yet though...

from "Cereal Killer" thread on homebrewtalk:

http://www.homebrewtalk.com/f11/cereal- ... ost3452326

I am fortunate enough that the Cereal Killer Grain Mill is provided by my LHBS Adventures in Homebrewing. I can say they are a top notch business. As a matter of fact they just opened up a second location in Ann Arbor, MI. I inquired about this Cereal Killer and it was explained to me that a big reason for this new mill was because they could not procure the Barley Crusher in a consistent enough manner to keep up with the order demand coming through the store.

On Friday Oct. 28 I visited the store and was able to compare the Cereal Killer and the Barley Crusher side by side. Both mills come with a crank handle, metal hopper and a base to sit on a bucket. When it comes to the actual roller mechanism a person would be hard pressed to see a real difference between the two. They both have a thick aluminum base and adjustable knurled rollers (only passive roller is adjustable). The Cereal killer uses two thumbs screws as set screws. I liked this feature because it is nice making adjustments without using tools. There is a difference in the length of the crank handle. The Barley Crusher handle is a couple of inches longer than the Cereal Killer's handle. At first I thought the shorter handle was a negative because it was obvious there would be less torque. However, it also occurred to me that a shorter handle on the Cereal Killer would actually increase the RPM'S making it produce crushed grain faster. The shorter handle might be a perfect balance between torque and speed but having never used either the verdict is still out. However, using a drill on either of these would of course negate any differences in the handle lengths.

The Cereal Killer really shinned through with the superior workmanship on the metal hopper and base. My personal opinion is all of the metal work and base of the Cereal Killer appeared to be very uniform and built with a much greater tolerance than the Barley Crusher. Some of the fitment points, rivets on the Barley Crusher seemed sharp/uneven or to put it plainly it gave the impression of a rush job. I can't say that the "look" would make the Barley Crusher any more/less effective but if you were to pick one out for the showroom you would definitely pick the Cereal Killer.

One last note. The Cereal Killer is not a Chinese made knockoff. It is manufactured right here in Michigan. If anything I would consider the Cereal Killer to be an improved version of the Barley Crusher idea.

Will head out during lunch tomorrow to pick up the Cereal Killer Grain Mill. I can give you further feedback, after using it, if anyone wants to hear about it.

Mike

[Dirt Chicken]

Where did you get your Cereal Killer Tom?

[macdonaldtomw]

I didn't get a cereal killer... I got the cheapest crankandstein that was available (the $79 one) on a group buy that started as a result of this thread.

[RubberToe]

I didn't get a cereal killer... I got the cheapest crankandstein that was available (the $79 one) on a group buy that started as a result of this thread.

How is it working?