Hi All,
I'm moving up to a 19 gallon kettle to do single vessel brew in a bag, so I'm selling off some older stuff. If anybody is interested in two or all three we could negotiate a discount.
Mash Tun - sold
http://www.brewnosers.org/forums/viewto ... =6&t=10857 - first, this is still available, it would go with either of the below. I used to fit 24lb of grain in it and get 75% efficiency or so.
Keggle - sold
Three ports, with ball lock, thermometer (glass is cracked but still reads fine) and dip tube, also has a custom built copper dip tube that's a half inch ID. I misplaced it for a while so I ended up getting the smaller one that's in there. I've been using this as a mash tun, so it also comes with a bag from Mashed In Gear. If using for a kettle I'd use the bigger dip tube to drain it quicker. The top port is capped off, but it could be used for whirlpooling if you had a pump.
15 gallon kettle - sold
http://www.brewnosers.org/forums/viewto ... 56#p148756 - I bought this from mumblecrunch last year so rather than type it all out again I'm just copying his link. Has custom side port for whirlpooling, fancy tilting thermometer.
SOLD - 10 gallon all grain equipment
- amartin
- Award Winner 8
- Posts: 1759
- Joined: Fri May 20, 2011 12:49 pm
- Location: Hammonds Plains
SOLD - 10 gallon all grain equipment
You do not have the required permissions to view the files attached to this post.
Last edited by amartin on Thu Jul 05, 2018 7:38 am, edited 3 times in total.
- amartin
- Award Winner 8
- Posts: 1759
- Joined: Fri May 20, 2011 12:49 pm
- Location: Hammonds Plains
Re: 10 gallon all grain equipment
Update - I'm taking off the higher end thermometer and dip tube and one of the ball valves, just because I'm going to need these items or similar ones for the next kettle I get anyway. Without these (so still including one ball valve and the extra side port) I'm now asking $100 OBO.
Who is online
Users browsing this forum: No registered users and 7 guests