Re: Useful supplier links

GAM · Post by **GAM** » Thu Oct 09, 2014 4:22 pm

Jimmy wrote:Atlantic Hardchrome
http://www.atlantichardchrome.com/" onclick="window.open(this.href);return false;
5 Notting Court
Burnside Industrial Park
Dartmouth, Nova Scotia
Canada B3B 1N2

Telephone: (902) 469-3606

I called them about o-rings for my ball locks and received the following prices. Lead time is 2-3 days.

(Dip Tube O-Ring) #109 Buna cost is .06 cents , Silicone cost is .42 cents each
(Post O-Ring) #111 Buna cost is .07 cents , Silicone cost is .46 cents each
(Lid O-Ring) #417 Buna cost is $ 4.81 each , Silicone is $ 8.98 each

I know that they also carry the silicone o-rings (and pretty much any other o-ring) that people usually use to replace the black gasket inside the camlocks; I forget sizing and price, but remember it being reasonable.

Jim

I'll take a dozen of each if your going to pick up.

Sandy

Celiacbrew · Post by **Celiacbrew** » Thu Oct 09, 2014 5:37 pm

I would take some of the camlock ones if they are available.

Post by **LeafMan66_67** » Thu Oct 09, 2014 7:29 pm

Jimmy - are you doing a run on them? I recently ran out of both post and dip tube o-rings.

Post by **Jimmy** » Thu Oct 09, 2014 7:36 pm

Don't plan on picking any up as of right now. I figured it was worth asking them about as I was contacting them anyway for a work related issue.

Sent from my Nexus 5 using Tapatalk

Post by **LeafMan66_67** » Thu Oct 09, 2014 7:46 pm

Ok - thanks for the info.

Post by **Jimmy** » Thu Oct 09, 2014 7:53 pm

No problem. The lid o rings are not a deal, but the post and dip tube ones are worth buying a bunch to have and just replace during each cleaning IMO

Sent from my Nexus 5 using Tapatalk

Keith · Post by **Keith** » Thu Oct 09, 2014 8:45 pm

Get me a bunch of the post and dip tub rings Jimmy. I want the cheap black ones, 50 of each work

Who is online