Too much crystal malt???

A spot to talk general homebrew
Post Reply
andrewhines1984
Registered User
Registered User
Posts: 39
Joined: Wed Jul 17, 2019 10:08 am

Too much crystal malt???

Post by andrewhines1984 » Thu Jul 25, 2019 12:21 am

I think I may have added way too much crystal malt (33% , 15L) to my grain bill (intended ESB). O.G. was 1.063... which I know is high It was close to 3am when we were getting the wort down to temperature, and we had enjoyed too many beers to worry about trivial things like target gravity

Anyway, my question is what am I to expect from that much crystal malt?

User avatar
oceanic_brew
Verified User
Verified User
Posts: 625
Joined: Wed Aug 26, 2015 6:14 pm
Name: Glen O'Keefe

Re: Too much crystal malt???

Post by oceanic_brew » Thu Jul 25, 2019 7:04 am

I’ve never brewed an ESB but something tells me the batch is far from ruined. Especially since it’s 15l.

Some recipes I just viewed had anywhere from 10-20% of the malt bill as crystal malts and some were much deeper malts. Perhaps 30 may tip the flavor scales.

Was this the only crystal malt you used? Other malts are crystal-ish in hiding.


Sent from my iPhone using Tapatalk

User avatar
McGruff
Registered User
Registered User
Posts: 626
Joined: Wed Feb 29, 2012 8:46 am
Name: Chris Storey
Location: Cavan, Ontario

Re: Too much crystal malt???

Post by McGruff » Thu Jul 25, 2019 7:35 am

Yes, I think you used too much crystal malt. But since it is only 15 L it will be drinkable. Now if it was something like crystal 40, 50, or upwards, it would definitely be hard to drink imo.

andrewhines1984
Registered User
Registered User
Posts: 39
Joined: Wed Jul 17, 2019 10:08 am

Re: Too much crystal malt???

Post by andrewhines1984 » Thu Jul 25, 2019 8:23 am

That’s part of the reason that I’m wondering how it’ll turn out, I figured it might be light enough to work out.

The other 66% is 2 row.

I’ve never brewed with crystal malt in an all grain batch.

I guess at the end of the day, I should have a really good idea of what it brings to the table?


Sent from my iPhone using Tapatalk

User avatar
joe_r_harvie
Registered User
Registered User
Posts: 90
Joined: Fri Mar 27, 2015 8:10 pm
Name: Joe Harvie
Location: Middle River, Cape Breton

Re: Too much crystal malt???

Post by joe_r_harvie » Fri Jul 26, 2019 7:39 am

I think your beer will be fine. I brew mostly bitters and crystal malts make up 10-20 percent of all my recipes. Yours should be full bodied and sweet!
Primary -
Secondary -
On tap - Golden Ale, Standard Bitter, Best Bitter, Blonde, Best Bitter, Premium Bitter, IPA

andrewhines1984
Registered User
Registered User
Posts: 39
Joined: Wed Jul 17, 2019 10:08 am

Re: Too much crystal malt???

Post by andrewhines1984 » Sun Jul 28, 2019 6:12 pm

I did an additional hop boil and added it to the secondary to bring the overall IBUs up around 60 and hopefully balance it out a bit more. Also plan to dry hop to round out that sweetness. Fingers crossed.


Sent from my iPhone using Tapatalk

Post Reply

Return to “General Homebrew Discussion”

Who is online

Users browsing this forum: No registered users and 20 guests